Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Workflow of Automatic Belt Conveyor For Gypsum Lines Or Long Wire Plate：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packaging machine for packagin

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

Scheme of Intelligent Sorting And Conveying System For Manmade Board Industry:The inspection plate specifications are wide (1080-1830), long (2100-2745), working level: veneer transport 2350mm;The pallet transport height is 800mm, the scheme is at the exit of the butt sand saw line The pallet is reversed through the 360 rotary roller conveyor to enter our roller chain conversion conveyor into the lifting table in turn to raise the working height to 800, so that it enters the double-line double-entry plate destacking position through the roller chain conversion conveyor in turn for plate inspec

Classification requirements:1.

The influence of "Made in China" is gradually expanding, and the industrial manufacturing and logistics chain with Chinese mainland as the source has long formed a trend of radiating the world.

1. Packaging overview1.1 This equipment is a special equipment for automatically winding stretch film onto the carton.

1. Machine and wrapping size of Pre-stretch Pallet Wrapper MachineMax load size(mm) 1200(L)X 1200(W)x2400mmTurntable diameter: 1650mmMast height: 2800mmTurntable height: 78mmTurntable speed:3-12rpmMachine weight: 650 kgPacking size: 2920*1750*930mmMachine weight: 750kgElectrics: 380V 50HZ 3P/220V 50Hz 1P2. Controls of Pre-stretch Pallet Wrapper MachineHMI Digital displayPhoto-eye pallet peak sensorReinforce wrap enable extra wrap on identical location3-12RPM variable turntable pace via inverterCycle pause capability3.

  Main electrical parts and spare parts of Full Automatic Rotary Arm Stretch WrapperComponent nameBrandPLCSiemensTouch screenSiemensinverterSchneiderPhotoelectric switchPanasonicProximity switchOMRONCircuit breakerSchneiderMini circuit breakerSchneiderContactorSchneiderSolenoid valveStandard configuration: YADEKECylinder Standard configuration: YADEKERocker driving reduction motorChina famous brandMaster device SchneiderBolts and other fasteners Grade 8.8DC24V-3A power supply shall be provided separately, and Mingwei shall be selected as the DC power supply;2、Main tech

The fully automatic crisscross sword-threading strapping machine with integrated corner protectors and stretch film wrapping system empowers new energy photovoltaic manufacturers to achieve end-to-end damage-free packaging for components from production to transportation and storage. Compared to manual packaging, it demonstrates significant advantages in efficiency, cost-effectiveness, quality, and safety.1.

Material Of PP packing strap for automatic strapping machine :Polypropylene wire drawing resin has many advantages, such as good plasticity, strong breaking tension, bending resistance, light specific gravity, high strength, good toughness, soft texture, non-absorbent, recyclable, smooth end surface, small wear and tear, many varieties, easy to use and so on. It has been widely used in various fields.PP packing strap for automatic strapping machine basic description:1. Polypropylene (PP) is the main raw material.

1.2、Packaging materials:1. LLDPE stretch film;2.

Technical parameters of Automatic Door And Window Wide Horizontal Wrapping Winding Packaging Machine1. Product specifications and packaging requirementsPackaging: doors and windowsWidth: 1000mm-2400mmThickness: ≤ 120mm, ≥80mmLength: ≥1200mm, ≤2400mm2. Packaging materialsUse a fixed size wrapping filmLLDPE stretch filmThickness: 20-30μmFilm width: 500mm (fixed size)Inner diameter of paper cylinder: 76.2mmMaximum outer diameter of film roll: 240mmSupply Scope:1.

Properties of Full Automatic Unmanned Bag Folding Machine:This machine should be used with the automatic bagging machine:Table height: 600mmApplicable power supply: 220v 4.5KWSupply of air pressure source: 6KG/cm2Main Parameters of Full Automatic Unmanned Bag Folding Machine：Machine Size2700×2190×2100mmBox SizeL690*W520*H248mm  L640*W450*H300mmSource power220V  50/60HZAir pressure source5Kg/cm2 Main configurations of Full Automatic Unmanned Bag Folding Machine：ConfigurationsInstructionBrand/OriginControl systemThe latest special PLC controller for stepping mo

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

Features of Full Automatic Extended Corner Protection Horizontal Strapping Machine1. Steel frame structure to ensure the stable operation of the machine2. The machine head adopts the integrated design of automatic tightening, welding and cutting belt, which is fully suitable for packing belt3. The machine head can be moved close to the goods and then belted, avoiding the change of pallet size and some gaps are too large4. Automatic detection device for pallet material height. The encoder controls the precise strapping position according to different stamp heights5.

Standard  specifications Of Full Automatic Unmanned Carton Bagging Machine:Mechanical dimensionsL2400 × W1700 × H1850mmCarton Size (L200～600) × （W200-450）(H=H+W/2<550)mmInbound speed22m/min (0-10 boxes/min)Size of adhesive filmW220 ～ 600mm (M-type folding barrel membrane)Film thickness30~80um (M-type folding barrel membrane)Conversion of carton adhesive filmCarton:（L+W）*2+160mmPower Supply220V/380V  50HZTable Height <600mmMechanical length including leveling of bag in boxStandard machine length 1800mmNon standard machine specification：Mec

Material Of PP packing strap for computerized strapping desktop :Polypropylene wire drawing resin has many advantages, such as true plasticity, sturdy breaking tension, bending resistance, mild precise gravity, excessive strength, desirable toughness, tender texture, non-absorbent, recyclable, clean stop surface, small put on and tear, many varieties, effortless to use and so on. It has been broadly used in a number fields.PP packing strap for automated strapping computing device simple description:1. Polypropylene (PP) is the principal uncooked material.

Main Parameters Of Airport Using Bag Wrapper Machines1. Machine introductionLuggage wrapper is designed to wrap baggage and relate gadgets for protection reason in airport.Film presents more guide whilst the baggage is being transport to guard from being damaged.The operator locations the baggage on the platform and adjusts vertical rods to impervious bag in accordance the luggage's size.2. Technical parameterMax.

Control System of Pre-stretched Drip Tape Cylinder Type WrapperProgram control unit integrated machine;counts of wrapping can be set ,Separate top,bottom and up-down wrap count selectors;Reinforcement of winding function, can give special protection to certain;Film carriage of Pre-stretched Drip Tape Cylinder Type WrapperPowered pre-strech system up to 250% to min film consumption Carriage lifting motor：Motor power ：    0.37kwMain configurations of Pre-stretched Drip Tape Cylinder Type WrapperMotor: Gale 85SZDPLC Programming

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

Overall technical parameters of Pallet Push-pull Pproduct Line1. Hydraulic pusher:Pallet retention ejector, without side shift, without forks, without pallet retention function, push-out structure is scissor structure2. The load capacity is 1500KG, the loss distance is about 280mm, and the horizontal center of gravity is about 135mm (subject to the actual design)3.

PE film has moisture resistance, small moisture permeability, is a blown film, thick texture, not easy to stretch and deform.Product Specification For PE capping films(More specification,please contact with us at any time):Width (mm): 300-2000Thickness (mm): 0.05-0.40Production process of PE film:Film blowing machine is a mechanical equipment that heats and melts plastic particles and then blows them into a film.